home recent topics recent posts search faq  
Better RVing
login | lost password | register
Home » Electrical » tow dolly running light power Messages in this topic - RSS
8/1/2011 9:42:46 PM
Hart2Harts
Hart2Harts
Posts 9
I have a 2008 Bounder Diesel 38F with Frieghtliner chassis. I don't have power to the towing electrical connector for running lights. All motorhome running lights work though. Can't find a dedicated fuse or relay for towing light power. Brake lights and turn signal lights do work on dolly. Trying to trace out wire but is very difficult. Have good ground also. Where would I look for the power supply to come from up front? Any help would be greatly appreciated.

Thanks,

--
Denny
8/2/2011 10:41:15 AM
Steve Roddy
Steve Roddy
Lazydays Employee
Posts 647
Look for a fuse in the Freightliner panel. Should be located on the passenger side outside compartment behind rear wheel.
8/3/2011 9:43:17 PM
Hart2Harts
Hart2Harts
Posts 9
Thanks Steve, You were right on as usual. I saw the box but it looked like ECM controls. I found the burnt out fuse to. I should have asked you first and avoided a lot of work.

Thank you again,
Hart2Harts

--
Denny
8/4/2011 12:29:33 PM
Steve Roddy
Steve Roddy
Lazydays Employee
Posts 647
As long as you gain experience from the extra work, all is good.
pages: 1

Home » Electrical » tow dolly running light power