12/4/2011 11:24:33 PM permalink
ricksan76 Posts 1	Ok My generator starts and shuts right back down. The error code that I got is 36. Please help. I did find a wire that was chewed through Took the whole gen out, repaired the wire thinking this was the problem. Put it back in, and the same thing was still happening. Any help would be greatly appreciated. I plan on testing the fuel pump tomorrow, I just dont know what else it could be.
	12/6/2011 12:58:14 PM permalink
Steve Roddy Lazydays Employee Posts 647	Code 36 = Engine stopped without command by the controller. Fuel, spark plug, blocked exhaust, air cleaner, fuel filter, fuel shutoff solenoid, fuel pump, brushes/slip rings, rotor or stator and finally the controller. If it starts I would think the fuel,spark plug, fuel filter, solenoid and pump are OK. You need to check voltage output at the brushes.
pages: 1